language

ELMASS TECHNOLOGY

G & O Kert P/L trading as

Elmass Internal Keyways
44-50 Achievement Crescent
Acacia Ridge QLD 4119
Tel: 07  3881 1919


Spline Broaching Tool Type 24 For Through & Blind Bores

  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.43.27-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.43.39-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.43.50-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.44.21-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.44.46-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.45.14-pm.png

We use a wide range of broaching tools in metric and imperial dimensions for through bores and blind bores, for bores in nominal sizes as well as for bores with grinding tolerances.

The Tool Set Type 24 is designed to cut 8mm to 14mm wide and up to 150mm long  keyways and splines in bores from Ø= 24mm to Ø = 50mm.

Up to 400mm long tool bars as well as guide bushes and cutters in other dimensions can be made within a short time frame.

Technical specifications can change at any time without notice.

The metric Tool Set Type 24 contains the following components:

Quantity Components of each set Dimensions
1 main body assembly
1 tool holder morse taper No: 2
1 tool holder square 20x20mm
1 tool holder round  20x20mm
1 torque arm
1 tool bar, 150mm long, max. tool size: 8x8mm
1 tool bar, 150mm long, max. tool size: 10x10mm
1 tool bar, 150mm long, max. tool size: 14x14mm
1 cutting tool, rake 12o 8x8mm
1 cutting tool, rake 20o 8x8mm
1 cutting tool, rake 12o 10x10mm
1 cutting tool, rake 20o 10x10mm
1 cutting tool, rake 12o 12x14mm
1 cutting tool, rake 20o 12x14mm
1 cutting tool, rake 12o 14x14mm
1 cutting tool, rake 20o 14x14mm
1 Guide bush, tolerance f7, diameter 24mm
1 Guide bush, tolerance f7, diameter 25mm
1 Guide bush, tolerance f7, diameter 28mm
1 Guide bush, tolerance f7, diameter 30mm
1 Guide bush, tolerance f7, diameter 32mm
1 Guide bush, tolerance f7, diameter 35mm
1 Guide bush, tolerance f7, diameter 38mm
1 Guide bush, tolerance f7, diameter 40mm
1 Guide bush, tolerance f7, diameter 42mm
1 Guide bush, tolerance f7, diameter 45mm
1 Guide bush, tolerance f7, diameter 48mm
1 Guide bush, tolerance f7, diameter 50mm
1 allen key set
1 wooden carrying case

Demonstration how elmass® tools are used on a drill press

<< Back

Copyright (C) 2020 Elmass Internal Keyways. All Rights Reserved. Website Design by