P36 – 500 / 700 NC Broaching Machines For Keyways & Splines – QLD
The P36 is our largest machine. This very robust broaching machine is designed to produce very long and large keyways and splines in small, medium and large production runs ion through holes and blind bores. The P36-500/700 NC is optimized for flexibility and power. It broaches 2mm to 36mm wide and up to 500mm respectively 700mm long keyways or splines.
Sturdy, low maintenance design
Built for mass production our P36-700-NC Broaching Machine incorporates years of shop floor experience and operators’ suggestions.
An integrated cross table permits easy positioning of pieces to machine.
Designed to mass produce keyways in blind bores, the workspace is completely closed off to prevent oil and chip projection and to facilitate cleaning.
The machine has been built in order to occupy the smallest space possible without lessening the easiness of use or the capacities, while increasing the operator’s productivity.
Easy programming – no NC code required
An embedded system controls all the machine functions. The programming is operator-friendly via a 15’’ touch screen. Easily-interpretable icons interactively request the few necessary input parameters (e.g. bore diameter, keyway width, and cutting depth) step-by-step. If required, these values can be optimized manually at any time.
Positioning and operation
A highly dynamic electrical motor positions the cutter automatically. The predetermined machining parameters automatically set broaching and retracting speed, cutting pressure, cutter feed and retraction. The parameters can be adapted manually in fine steps to match any requirements.
The broaching tools
Our P36-700-NC Broaching Machine is purposely designed to operate the patented elmass® broaching system. All elmass® broaching tools are available in metric and imperial sizes. All metric and imperial components are interchangeable, thus minimizing tooling costs without compromising flexibility. Combining both the P36-700-NC Broaching Machine and the elmass® broaching system with its guided life tools, results in the longest life and the highest performance and cost effectiveness in the hardest production environments.
|Stroke for automatic broaching:||700mm|
|Cutter width:||2mm up to 36mm|
|Parts diameter:||up to 900mm|
|Max pressure:||40kN, fixed setting|
|Max cutting / retracting speed:||15m/min|
|Frame dimensions L x W x H:||1300 x 1600 x 2800 / 3000mm|
|Programming:||Interactive touch-screen panel, no NC code|
|Language:||English, German, French. Dutch|
|Electric Connections:||3 x 400VAC, N, E, 50/60HZ, 8kW|
|Technical Specifications:||subject to change and are not contractual|