language

ELMASS TECHNOLOGY

Elmass (Australia) Pty Ltd
Unit 1 / 6 Moonbi Street
Brendale 4500, Australia
Tel:(+61) 07 3881 1919
Fax: (+61) 07 3881 2323

Email: info@elmass.com.au

Broaching Tool Type 55 for Cutting Keyways, Involute Splines in Large Parts

  • https://www.elmass.com.au/wp-content/uploads/2017/08/tzpe-55.jpg
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.43.27-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.43.39-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.43.50-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.44.21-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.44.46-pm.png
  • https://www.elmass.com.au/wp-content/uploads/2017/08/Screen-Shot-2017-08-31-at-2.45.14-pm.png

Tool Type 55 designed for wide keyways and splines in large bores

The tool sets are available in metric and imperial dimensions for through bores and blind bores, for bores in nominal sizes and bores with grinding tolerances.

The Tool Set Type 55 is designed to cut 16mm to 36mm wide and up to 150mm long  keyways and splines in bores from Ø= 55mm to Ø = 150mm.

Up to 500mm long tool bars are available ex stock. Tool bars ,guide bushes and cutters in other dimensions can be made within a short time frame.

Technical specifications can change at any time without notice.

The metric Tool Set Type 55 contains the following components:

Quantity Components Dimensions
1 main body assembly
1 tool holder morse taper No: 2
1 tool holder square 20x20mm
1 tool holder round  20x20mm
1 torque arm
1 tool bar, 250mm long, max. tool size: 18x18mm
1 tool bar, 250mm long, max. tool size: 25x25mm
1 tool bar, 250mm long, max. tool size: 36x36mm
1 cutting tool, rake 12o 18×18-16
1 cutting tool, rake 20o 18×18-16
1 cutting tool, rake 12o 18×18
1 cutting tool, rake 20o 18×18
1 cutting tool, rake 12o 25×25-20
1 cutting tool, rake 20o 25x25x-20
1 cutting tool, rake 12o 25×25-22
1 cutting tool, rake 20o 25×25-22
1 cutting tool, rake 12o 25×25
1 cutting tool, rake 20o 36×36-28
1 cutting tool, rake 12o 36×36-32
1 cutting tool, rake 20o 36×36
1 cutting tool, rake 12o 36×36
1 Guide bush, tolerance f7, diameter 55mm
1 Guide bush, tolerance f7, diameter 60mm
1 Guide bush, tolerance f7, diameter 65mm
1 Guide bush, tolerance f7, diameter 70mm
Guide bush, tolerance f7, diameter 75mm
1 Guide bush, tolerance f7, diameter 80mm
1 Guide bush, tolerance f7, diameter 85mm
1 Guide bush, tolerance f7, diameter 90mm
1 Guide bush, tolerance f7, diameter 95mm
1 Guide bush, tolerance f7, diameter 100mm
1 Guide bush, tolerance f7, diameter 110mm
1 Guide bush, tolerance f7, diameter 120mm
1 Guide bush, tolerance f7, diameter 130mm
1 Guide bush, tolerance f7, diameter 140mm
1 Guide bush, tolerance f7, diameter 150mm
1 allen key set
2 wooden carrying case

Demonstration how elmass® tools are used on a drill press

<< Back

World wide sales and support from elmass ®

  • Elmass (Australia) P/L
    1/6 Moonbi St
    Brendale QLD 4500
    Australia

    Tel:  (+61) 07 3881 1919
    Fax: (+61) 07 3881 2323

    info@elmass.com.au

  • Elmass Production Lariellestraat 4
    B-1500 Halle
    Belgium

    Tel:  (+32) 2 359 0980
    Fax: (+32) 2 360 3617

    info@elmass.com

  • Elmass Schweiz Kirchbergstr. 91
    8200 Schaffhausen
    Switzerland

    Tel:  (+41) 52 643 2494

    wbuehrer@elmass.com

  • captcha

Copyright (C) 2018 Elmass (Australia) P/L. All Rights Reserved. Website Design by