language

ELMASS TECHNOLOGY

Elmass (Australia) Pty Ltd
Unit 1 / 6 Moonbi Street
Brendale 4500, Australia
Tel:(+61) 07 3881 1919
Fax: (+61) 07 3881 2323
: info@elmass.com.au

Broaching Tool Type 11

For Cutting Keyways, Straight Sided Splines In Blind Holes & Through Bores

Tool Type 11 for keyways and splines in blind bores and through bores.

The tool sets are available in metric and imperial dimensions for through bores and blind bores, for bores in nominal sizes and bores with grinding tolerances. The Tool Set Type 11 is designed to cut 4mm to 6mm wide and up to 150mm long  keyways and splines in bores from Ø= 11mm to Ø = 22mm. Up to 300mm long tool bars as well as ,guide bushes and cutters in other dimensions can be made within a short time frame.

The standard metric Type 11 Tool Set contains the following components:

 

Quantity Components of each set  Dimensions
1 main body assembly,  Morse Taper  No: 1 or 2  
1 torque arm   
1 tool bar, 100mm long, max. tool size: 4x4mm
1 tool bar, 100mm long, max. tool size: 5x5mm
1 tool bar, 100mm long, max. tool size: 6x6mm
1 cutting tool, rake 12o 4x4mm
2 cutting tool, rake 20o 4x4mm
1 cutting tool, rake 12o 5x5mm
2 cutting tool, rake 20o 5x5mm
1 cutting tool, rake 12o 6x6mm
2 cutting tool, rake 20o 6x6mm
1 Guide bush, tolerance f7, diameter  11mm
1 Guide bush, tolerance f7, diameter  12mm
1 Guide bush, tolerance f7, diameter  13mm
1 Guide bush, tolerance f7, diameter  14mm
1 Guide bush, tolerance f7, diameter  15mm
1 Guide bush, tolerance f7, diameter  16mm
1 Guide bush, tolerance f7, diameter  17mm
1 Guide bush, tolerance f7, diameter  18mm
1 Guide bush, tolerance f7, diameter  19mm
1 Guide bush, tolerance f7, diameter  20mm
1 Guide bush, tolerance f7, diameter  21mm
1 Guide bush, tolerance f7, diameter  22mm
1 allen key set  
1 wooden carrying case  

 

 

 


<< Back
Copyright (C) 2017 Elmass (Australia) P/L. All Rights Reserved.